What is a good layer height for resin 3D printing?

What is a good layer height for resin 3D printing?

The best layer height for resin printing usually ranges between 0.01-0.05mm (10 to 50 microns), where you would use 0.05mm for faster speeds while still maintaining great quality.

How can I improve my resin 3D print quality?

5 Settings to Improve Your SLA/DLP/LCD 3D Print Quality

  1. Step 1: Layer Height (mm) As the name implies, layer height is the exact height of each cured layer.
  2. Step 2: Exposure Time (s)
  3. Step 3: Lift Speed (mm/min)
  4. Step 4: Part Orientation.
  5. Step 5: Anti Aliasing.
  6. 6 Comments.

How do I optimize Cura support settings?

Support Settings

  1. When you first open Cura, click “Custom” under “Print Settings”. Here, you can adjust settings that are otherwise hidden under the “Recommended Settings”.
  2. Right-click and select “Configure Setting Visibility…”
  3. Select “Check All”.

What kind of resin is used in Anycubic printer?

I’m using the green Anycubic resin that came with the printer. These are the settings from that spreadsheet for printing with a 0.04mm layer height: You can set these in Settings > Print. For Light-off Delay and Bottom Light-off Delay, use the Off time value from the table.

What are the settings for Anycubic Photon resin?

To find the settings for your resin, consult this awesome crowd-sourced list of Anycubic Photon resin settings. I’m using the green Anycubic resin that came with the printer. These are the settings from that spreadsheet for printing with a 0.04mm layer height: You can set these in Settings > Print.

What are the settings on the Anycubic i3 Mega Cura?

The standard settings include a retraction speed of 60mm/s and a distance of 5mm. If your model shows stringing, play with increasing both the speed and distance. The Anycubic I3 Mega Cura 3D Printer also includes travel settings that help you reduce stringing. Combing is a setting that keeps your print nozzle within the parameters of your print.

How long is the exposure time on Anycubic Photon X?

The average between over 80 user submitted normal and bottom exposure times for the Anycubic Photon X (4K monochrome screen) was a bottom exposure time of 15.6x the normal exposure time.